| Customer Approvals |
RLC
Ronaldsway |
RLC
Langford |
RLC
Callender |
| Airbus UK |
|
|
|
- Airbus UK
(AUK/SA/001-1, 2, 3, 4, 5, & 6)
|
|
 |
|
Machining
- General Machining (metallic)(conventional)
- CNC Machining
|
|
|
|
Non-Machined parts
- Detail parts-metallic involving
Heat Treatment
- Detail parts-metallic not
involving heat treatment
- Mechanical press forming
|
|
|
|
Non-destructive testing
- Fluorescent Penetrant
- Magnetic
|
|
|
|
Protective treatment
- Chromic Anodising
- Sulphuric Anodising
- Cadmium plating (under 65 Ton)
- Cadmium plating (65-90 Ton)
- Cadmium plating (over 90 Ton)
- Paint spraying & stoving
|
|
|
|
Other
- Welding, brazing, soldering
- Bonding
|
|
|
|
Testing
- Mechanical Testing of Metallic Materials
|
|
|
|
Assembly
-
Minor mechanical assemblies
|
|
|
|
Material control
- Procurement of raw materials (metallic)
(inc. extrusions)
- Procurement of Standard Parts
|
|
|
|
|
| BAE Systems |
|
|
|
- BAE Systems (BAE/AG/QC/SC1 Part 1)
|
|
|
|
Machining -
- General Machining (metallic)(conventional)
- CNC Machining
|
|
|
|
Non-Machined parts
- Detail parts-metallic involving Heat Treatment
- Detail parts-metallic not involving heat treatment
- Mechanical press forming
|
|
|
|
Non-destructive testing
- Fluorescent Penetrant
- Magnetic
|
|
|
|
Protective treatment
- Chromic Anodising
- Sulphuric Anodising
- Cadmium plating (under 65 Ton)
- Cadmium plating (65-90 Ton)
- Cadmium plating (over 90 Ton)
- Paint spraying & stoving
|
|
|
|
Heat treatment
- Annealing (Aluminium Alloys)
- Solution Treatment (Aluminium Alloys)
- Precipitation (Aluminium Alloys)
- Pre-Ageing (Aluminium Alloys)
|
|
|
|
Testing
- Mechanical Testing of Metallic Materials
|
|
|
|
Assembly
- Minor mechanical assemblies
|
|
|
|
Material control
- Procurement of raw materials (metallic) (inc extrusions)
- Procurement of Standard Parts (Fasteners)
|
|
|
|
|
Non-destructive testing
- HP6-13 Inspection, penetrant,
flourescent
- HP6-5 Magnetic particle inspection
|
|
|
|
Protective treatment
- HP4-79 Anodizing Aluminium - wear resistance
|
|
|
|
|
| Boeing (in support of Bombardier Aerospace Shorts) |
|
|
|
Non-destructive testing
- BAC 5408 Vapour degrease
- BAC 5423 Penetrant flaw inspection
- BAC 5765 Deoxidise
- BAC 5946 Temper inspection
|
|
|
|
Heat treatment
- BAC 5602 Heat treatment of aluminium alloys
|
|
|
|
|
| Bombardier Aerospace Shorts |
|
|
|
Machining / Fabrication
- A1 General machining of aircraft components
- A2 Sheet metal fabrication of aircraft components
- Pspec 213 - Forming of aluminium alloys
|
|
|
|
Non-destructive testing
- Pspec 300 Penetrant flaw detect
- Pspec 301 Magnetic particle inspection
|
|
|
|
|
|
|
|
|
Heat Treatments
- Pspec 401 Heat treatment of aluminium and aluminium alloys
- Pspec 403 Cadmium plating of carbon, low alloy and stainless steels
- Pspec 407 Chemical cleaning and pre-treatments
- Pspec 410 Chromic acid anodising
- Pspec 411 Sulphuric acid anodising
- Pspec 416 Passivation of austenitc, martensitic and PH steels
- Pspec 419 Chemical conversion Coating of aluminium and aluminium alloys
- Pspec 430 Hard anodising
|
|
|
|
Testing
- QLP 1120 Hardness testing
- QLP 1121 Conductivity testing
|
|
|
|
Surface Treatments
- Pspec 700 Abrasive blasting
- Pspec 910 Etch and epoxy priming
- Pspec 911 Topcoat painting
|
|
|
|
|
| Goodrich Actuation Systems |
|
|
|
Gas integrator
- quality system 01-06-10
- 981-151-001 Manufacture of precision machined components and assemblie
|
|
|
|
Non-destructive testing
- 981-060-014 - Magnetic particle inspection
- 981-060-021 - Penetrant inspection
|
|
|
|
Surface Treatments- 914-032-023 - Phosphate
- 914-032-031 - Hard Anodising
- 914-032-037 - Sulphuric
Anodising
- 914-032-050 - Titanium Anodising
- 914-032-059 /
060 - Alocrom (1200)
- 914-032-093 / 099 - Chromic
Anodising
- 914-032-100 / 101 - Passivation of stainless
steels
|
|
|
|
Surface Coatings
- 914-034-037 - Polyurethane varnish
- 914-034-118 - Polyurethane painting
- 914-034-130 - Epoxy painting
- 914-016-023/027- Hard Chromium Plating
- 14-022-043 / 047 - Cadmium Plate
- 914-030-009 - Electroless Nickel
|
|
|
|
|
| Martin Baker Aircraft |
|
|
|
Testing
- Non-destructive testing
|
|
|
|
- Tensile testing
- Electrical conductivity
- Hardness testing
- Magnetic particle inspection
& penetrant
flaw detection
- roof load testing
- Proof and leak pressure testing
- Salt spray environmental testing
- Abrasive test of hard anodised
aluminium alloys
- chemical analysis
- Radiography
- Mechanical Testing
|
|
|
|
Surface Treatments
- shot peening
|
|
|
|
Surface Finishing
- Cadmium plating
- Nickle plating
- Sulphuric, Chromic and Hard Anodising
- Alocrom
- Suncorite
- Phosphating
- Passivation of steels and brass
- Polyurethane, Epoxy and cellulose paint
finishing
- Degreasing (Thrichloroethylene, Aqueous)
- Abrasive blasting
- Stress relief & De-embrittlement
- Application of bonded dry film lubricants
|
|
|
|
- Welding, brazing, soldering
|
|
|
|
Heat treatment
- Heat treatment of steel/aluminium
|
|
|
|
Other processes and capabilities
- Electrochemical etch marking
- Swaging and Honing
- Broaching
- Small press work
- Design of ground-support equipment
- Sheet Metal Shop
- Sewing room fabric assemblies
|
|
|
|
- plastic forming
- Electro-plating and Anodic Oxidation
- Painting
- Sewing of fabrics
- Investment Casting of alloys
- Manufacture of precision machined components
and assemblies
|
|
|
|
|
| Pratt & Whitney |
|
|
|
- Approval for the manufacture of Airfoil components
|
|
|
 |
|
| Rolls Royce UK |
|
|
|
Machining
- Test Piece Machining
- Precision Machining
- Sub-tier approval for precision machining
|
|
|
|
- Control of sub tiers for general
machining -
non classified parts only
|
|
|
|
|
|
|
|
- FAIR Approval
- Approve Data Cards
- Control of Classified Parts
- RPS 905 - Procurement and Control of
Raw Material for the Manufacture of Components
|
|
|
|
Heat Treatments
- RPS 431 Heat treatment of aluminium alloys
|
|
|
|
- RPS 54 Chromic acid anodising
- RPS 135 Nitride Hardening
|
|
|
|
- RPS 371 Carburising
- RPS 230 Deep Freezing
- RPS 574 - Heat Treatment of Fabrications
in Nickel and Cobalt Base Alloys
|
|
|
|
Surface Finishing
- RPS 661 Painting
- RPS 170 Cadmium plating
|
|
|
|
- RPS 168 Silver Plating
- RPS 297 SVAR 000400 Copper Plate
- RPS 438 Bronze Strip Only
- RPS 753 Chemical Etch Marking
- RPS 577 Impregnation of Porous Castings and Sprayed Metal Coatings
- RPS 638 - Lubricants Applied at Engine Build
|
|
|
|
- Precision Polishing of Aerofoil sections
- RPS 251 Barrell Finishing
- RPS 619 Super Polishing Aerofoils
|
|
|
|
Surface Treatments
- RPS 128 Vapour degrease
|
|
|
|
- RPS 386 Abrasive Blasting
- RPS 461 Cleaning and Degreasing Using Aqueous Media
|
|
|
|
- RPS 498 Ultrasonic and Hydrosonic Cleaning
- RPS 278 White Layer Removal
|
|
|
|
- RPS 271 Chemical Removal of Metallic Contamination
- RPS 674 Etching of Nickel Base and Steel Alloy Components for Metallurgical Inspection
- RPS 675 Etching of Titanium Alloy Components
|
|
|
|
Inspection
- RPS 700 Magnetic particle inspection
- RPS 702 Penetrant flaw inspection
|
|
|
|
- RPS 709 Visual Inspection
|
|
|
|
|
|
|
|
- RPS 953 Laboratory Control Procedure for Heating Furnaces and Associated Equipment and the Thermal Processing of Materials
|
|
|
|
Other
- Rolls Royce SB/QC33 (in support of Bombardier Aerospace Shorts)
|
|
|
|
- RPS 195 Thick Annodising
- RPS 436 Chemical Conversion
- RPS 482 Application of Filling Sealing & Caulking Compounds
|
|
|
|
|
|
|
|
- RPS 503 Encapsulation of Metal Parts
|
|
|
|
|
| Rolls Royce Deutschland |
|
|
|
| Siemens |
|
|
|
- Self release supplier
- Machining of turbine blades and vanes
|
|
|
|
|
| Thales |
|
|
|
- VP01
- precision machining
- non-destructive testing
- protective
treatments
|
|
|
|
|
| Westinghouse |
|
|
|
- Qualified supplier for the mechanical machining of turbine
blades and vanes
|
|
|
|
|
